SPIRAL DUCT FORMING MACHINE
BRAVO TF 470 SPIRAL TUBE FORMER
TAKE IT TO THE JOB SITE! DON’T SHIP AIR! You don’t want to ship already formed duct if possible, right. The Bravo Spiral Duct Former is compact, strong and mobile. It is easy to take from one jobsite to another. Producing on-site eliminates the need to ship “air”, it also eliminates the hand cutting to length. Program any length up to 10ft. It will automatically and silently cut (slit) the duct to length.
Included features
- 2200 lb capacity payoff reel.
- Control Panel with easy to use interface…programmable in English – Spanish
- Length control by Infrared Sensor Switch
- Flying Slitter Cut-off System….smooth and quiet.
- Plasma Cutting System… special for heavy gauges.
- 10ft Run Out Table with Automatic Dumping
- Receiver table for duct sections dumped from the Run Out Table
- Beading Attachment optional (for stiffening lighter gauges)
- Two roll formers cassettes to enable duct forming from 26 gauge to 18 gauge galvanized.
- Hard Tool Molds, from 4” to 70” (pairs diam)
- Forms mild steel, aluminum and stainless
- Meets SMACNA Standards
- Internationally recognized and available components to include but not limited to:
- Schneider Electrics
- Siemens PLC and Touchscreen
- SAVCH Inverter
- NSK Bearings
- Hypertherm Plasma Unit
Specifications
- Power: 220/3/60
- Pneumatics required: 100 psi with minimum of 200 l/min.
- Capacity: 26 ga. to 18 ga. galvanized mild steel
- Strip width: 5.394”
- Foot print……………………….……. 154” x 140” x 70”high
- Weight………………………………………………………4,630 lbs
- Programmable feed speed range approx. 0-100 FPM.
Expected Performance,
based on 10ft sections.
– 0.5 mm (0.020’’) thickness – 100 mm (4”) diameter – 120 Ducts/hour
– 0.7 mm (0.028’’) thickness – 500 mm (20”) diameter – 45 Ducts/hour
– 0.9 mm (0.035’’) thickness – 1250 mm (50”) diameter – 15 Ducts/hour
Watch our video of the machine in action:
Product Gallery
BRAVO TF 470 SPIRAL TUBE FORMER
BRAVO TF 470 SPIRAL TUBE FORMER
BRAVO TF 470 SPIRAL TUBE FORMER
BRAVO TF 470 SPIRAL TUBE FORMER
BRAVO TF 470 SPIRAL TUBE FORMER
BRAVO TF 470 SPIRAL TUBE FORMER
BRAVO TF 470 SPIRAL TUBE FORMER
BRAVO TF 470 SPIRAL TUBE FORMER
BRAVO TF 470 SPIRAL TUBE FORMER
BRAVO TF 470 SPIRAL TUBE FORMER
BRAVO TF 470 SPIRAL TUBE FORMER
Are you interested in this product?
RECTANGULAR DUCT LINE
BRAVO 6018 DUCT LINE
Make blanks, L, U section or full wrapper duct automatically & cost effectively
Designed and Built for Reliability and Affordability.
AFFORDABLE. Now a CNC rectangular duct line is within the financia! reach of even the smallest HV AC contractor. lt costs less than the contractors new pickup truck and this duct line will pay for itself in labor, material costs and scrap savings in about 10 months (assuming 150,000+ lbs. processed per year)
RELIABLE & SUPPORTABLE … anywhere in the world. No matter where it is used in the world, this duct line has been designed to be able to be supported locally. We build the machine with internationally respected and available components. Whether in Dubai or Johannesburg, parts for this machine are available.
Benefits
- Fast Payback. lf you produce 150,000 lbs. of duct or more in a year, you can expect the savings in material and labor costs to pay for this machine in 10 months or less.
- Accuracy. Everything is automatic and precise; servomotor and encoder are better than just using measuring tape.
- Always ready. The Bravo 6018 Rect Duct Une beats you to work, does not take lunch or breaks.
- Material Savings. Most users save between 18 and 24% on scrap and as much as 20% with coils.
- Labor savings = payroll savings. Make duct in a fraction of the time when produced by hand.
Features include
- Uncoiling: One carriage with two 6000 lb. x 60″ wide payoff reels, with expandrels
- Touch Screen CNC Controlled
- Automatically Feeds off the Coil
- Straightens, Beads, Notches (S&Drive, TDC and TDF)
- Shears and Brakes to Half Sections or Full Wrapper Duct
Specifications
- Capacity: 60″ x 18 Gauge Galvanized
- Electrics: 220/3/60 (Standard)
- Max duct length: 13′
- Footprint: 7′ x 28′
- Max Coil Weight: 12,000#
- Max Coil Width: 60″
- Min duct width: 8″
- Max Thickness of Metal: 18-gauge mild steel
- Line Speed: Approx. 0-30 fpm
Major components include
(all well known, respected and available anywhere in the world)
- PLC: Panasonic
- Electrics: Schneider or Siemens
- Rotary Encoder: Nemicon (Japanese)
- Bearings: Torrington, SKF or Koyo
- Hydraulics: Huade (Taiwan)
- Servo motor: Yaskawa
- Touch Screen: Weilun
Note: These components were chosen beca use they are internationally known for very good quality and readily available throughout the world. Not only reliable and affordable, but also SUPPORTABLE).
Watch our video of the machine in action:
Product Gallery
BRAVO-RECT DUCT LINE 6018
BRAVO-RECT DUCT LINE 6018
BRAVO-RECT DUCT LINE 6018
BRAVO-RECT DUCT LINE 6018
BRAVO-RECT DUCT LINE 6018
BRAVO-RECT DUCT LINE 6018
BRAVO-RECT DUCT LINE 6018
BRAVO-RECT DUCT LINE 6018
BRAVO-RECT DUCT LINE 6018
BRAVO-RECT DUCT LINE 6018
BRAVO-RECT DUCT LINE 6018
BRAVO-RECT DUCT LINE 6018
Are you interested in this product?
HYDRAULIC ROUND ELBOW MACHINE
BRAVO HYDRAULIC ELBOW MACHINE
Bravo gore locking machine.
Make your own elbows….and cost effectively!
Consider the Bravo Hydraulic Round Elbow Machine. Two stations on one machine, one for flanging and the other for closing. The machine is always ready to go, No tool change required. Produce standing lock seams and reducers fast, easy and affordable. On par with but a fraction of the cost of the popular brand.
A great, complementary machine to our Spiral Duct Forming Machine.
Specifications
Diameter Range: 5” to 50”
Max segment angel: 30 degrees (90 degree elbow, 4 parts)
Material Thickness
0.4 – 1.2 mm (26 – 18 Ga) galvanized steel
Flanging Speed
Max. Adjustable to 120 m/min. (394 fpm)
Production Time
90 sec. (bend ø 200 mm, 90° / 4 segments)
Electrical Connection: 4KW, 220volts/3phase/60Hz
Watch our video of the machine in action:
FLAT OVAL DUCT
BRAVO OVALIZER DUCT MACHINE
Bravo Ovalizer Duct machine.
Take the advanges of Spiral Duct…. but Ovalized!
- Easy Installation
- Optimal use of Steel
- Smooth Air Flow
- The best when building is narrow
- Oval Duct is Nice!
A great, complementary machine to our Spiral Duct Forming Machine.
Specifications
Diameter Range: 16” to 60”
Oval Duct Size: H 6-20″ W 20.5-90.5″
Material Thickness
0.4 – 1.2 mm (26 ga- 18 ga.) galvanized steel
Effective Lenght
120″ (3 m)
Electrical Connection: 11KW, 220volts/3phase/60Hz
